Basketball court installation
A finished court is mostly groundwork: a level, well-drained base, a reinforced slab or asphalt, then the playing surface, lines and hoop. A backyard half court of about 30 by 50 feet typically costs $10,500 to $24,000 installed with an acrylic color coating, and more with sport tiles, lighting or a sloped yard. We match you with a builder who installs courts in your area.
A free matching service, not a basketball court builder. We find one who covers your area and tell you who they are before anything is shared. How it works
When to hire an installer rather than a kit
- The yard slopes or holds water after rain, so it needs grading or drainage before any slab.
- You want a poured concrete or asphalt base, which needs forms, rebar and finishing equipment.
- The hoop needs a proper in-ground footing sized for the pole and backboard.
- Your city or HOA wants drawings, setbacks or a lighting plan before you build.
- You want lighting, fencing or netting wired and set in at the same time as the slab.
- It is a school, church, HOA or park court that has to meet a spec and pass inspection.
What basketball court installation costs
| Job | Typical price |
|---|---|
| Small half court, 30 x 30 ft Concrete with acrylic color coating | $6,300 to $14,400 |
| Backyard half court, 30 x 50 ft Concrete with acrylic color coating | $10,500 to $24,000 |
| Backyard half court, 30 x 50 ft Concrete with modular sport tiles | $16,500 to $28,500 |
| High school full court, 84 x 50 ft Concrete with acrylic color coating | $29,400 to $67,200 |
| Turnkey half court from one dealer Tiles, hoop and finish, Texas | $30,000 to $65,000 |
| Leveling or regrading If the yard is not flat | $1,000 to $3,300 |
Ranges are the playing area times typical installed prices per square foot, from HomeAdvisor (updated June 2026), VersaCourt and Sport Court of Austin (updated June 2026). Read 26 October 2026. A guide, not a quote. The cost calculator adds site work and extras.
What a good quote includes
Ask for these six points in writing. Two quotes that cover them can be compared line by line.
Site survey
Levels across the area, soil, where water runs, and what is buried there, so the base is designed for your yard.
Base and slab
Slab thickness, concrete strength, reinforcement and the stone base beneath it, written into the quote.
Slope for drainage
A single, gentle fall so water runs off one side. Court builders work to about 1 inch in 10 feet.
Surface and lines
Acrylic coating, tiles or sealed concrete, the colors, and which lines are painted.
Hoop footing
The hoop model, the footing size and depth, and who sets it, so the pole stays plumb.
Permits and cleanup
Who applies for permits and HOA approval, and whether spoil removal and lawn repair are included.
Planning a court? Tell us the size and the yard, and we will find a court builder who covers your area.
Ask for a free quoteHow a court installation usually runs
Survey and design
The builder measures, checks levels and drainage, and agrees the size, surface, hoop and extras with you.
Permits and utility marks
Permits and HOA approval are filed, and 811 is contacted so buried lines are marked before digging.
Excavation and base
Topsoil comes off, the ground is graded to a fall, and a compacted stone base goes down.
Slab and cure
Forms, rebar and concrete go in, or asphalt is laid. Concrete is left to cure before any coating.
Surface, lines and hoop
The acrylic coating or tiles go on, lines are marked, and the hoop and any lights are installed.
Questions people ask
How long does basketball court installation take?
A small backyard court can take a couple of weeks from digging to playing, most of it curing time. HomeAdvisor says a full-size court can take four to six weeks. Permits and HOA approval add time before work starts.
Do I need a permit to install a basketball court?
Often, yes. Rules are local. For example, Leawood, Kansas, requires a building permit and keeps courts at least 10 feet from property lines, according to the Johnson County Post. Check with your city and HOA before you commit.
Can a court be installed on my existing driveway or patio?
Sometimes. If the slab is sound, level enough and drains, tiles or an acrylic coating can go on top. Cracks, heaving or standing water mean it needs repair or replacing first.
What thickness should a court slab be?
VersaCourt bases its slab prices on a 4 inch slab of 3,000 PSI concrete with #4 rebar. Your builder may specify more for poor soil, heavy frost or a commercial court.
Is it cheaper to install a court myself?
Tile kits alone run $2,700 to $8,300 for a half court, according to VersaCourt, but that excludes the slab, digging and shipping. Most people hire out the concrete even if they lay tiles themselves.
Get a free court installation quote
Three short steps: where the court would go, what you have in mind, and how to reach you. It takes about two minutes.
This is a free matching service, not a basketball court builder. We find one who covers your area and name them to you first. Nobody contacts you until you say yes.
Thanks, your enquiry is in.
- Within one working day we will email or call to tell you which basketball court builder covers your area.
- Your details reach that firm only if you say yes.
- They look at the site and give you a fixed price. No marketing from us, ever.